kube-proxy Configuration (v1alpha1)

Resource Types

ClientConnectionConfiguration

Appears in:

ClientConnectionConfiguration contains details for constructing a client.

FieldDescription
kubeconfig [Required]
string

kubeconfig is the path to a KubeConfig file.

acceptContentTypes [Required]
string

acceptContentTypes defines the Accept header sent by clients when connecting to a server, overriding the default value of 'application/json'. This field will control all connections to the server used by a particular client.

contentType [Required]
string

contentType is the content type used when sending data to the server from this client.

qps [Required]
float32

qps controls the number of queries per second allowed for this connection.

burst [Required]
int32

burst allows extra queries to accumulate when a client is exceeding its rate.

DebuggingConfiguration

Appears in:

DebuggingConfiguration holds configuration for Debugging related features.

FieldDescription
enableProfiling [Required]
bool

enableProfiling enables profiling via web interface host:port/debug/pprof/

enableContentionProfiling [Required]
bool

enableContentionProfiling enables block profiling, if enableProfiling is true.

LeaderElectionConfiguration

Appears in:

LeaderElectionConfiguration defines the configuration of leader election clients for components that can run with leader election enabled.

FieldDescription
leaderElect [Required]
bool

leaderElect enables a leader election client to gain leadership before executing the main loop. Enable this when running replicated components for high availability.

leaseDuration [Required]
meta/v1.Duration

leaseDuration is the duration that non-leader candidates will wait after observing a leadership renewal until attempting to acquire leadership of a led but unrenewed leader slot. This is effectively the maximum duration that a leader can be stopped before it is replaced by another candidate. This is only applicable if leader election is enabled.

renewDeadline [Required]
meta/v1.Duration

renewDeadline is the interval between attempts by the acting master to renew a leadership slot before it stops leading. This must be less than or equal to the lease duration. This is only applicable if leader election is enabled.

retryPeriod [Required]
meta/v1.Duration

retryPeriod is the duration the clients should wait between attempting acquisition and renewal of a leadership. This is only applicable if leader election is enabled.

resourceLock [Required]
string

resourceLock indicates the resource object type that will be used to lock during leader election cycles.

resourceName [Required]
string

resourceName indicates the name of resource object that will be used to lock during leader election cycles.

resourceNamespace [Required]
string

resourceName indicates the namespace of resource object that will be used to lock during leader election cycles.

KubeProxyConfiguration

KubeProxyConfiguration contains everything necessary to configure the Kubernetes proxy server.

FieldDescription
apiVersion
string
kubeproxy.config.k8s.io/v1alpha1
kind
string
KubeProxyConfiguration
featureGates [Required]
map[string]bool

featureGates is a map of feature names to bools that enable or disable alpha/experimental features.

clientConnection [Required]
ClientConnectionConfiguration

clientConnection specifies the kubeconfig file and client connection settings for the proxy server to use when communicating with the apiserver.

logging [Required]
LoggingConfiguration

logging specifies the options of logging. Refer to Logs Options for more information.

hostnameOverride [Required]
string

hostnameOverride, if non-empty, will be used as the name of the Node that kube-proxy is running on. If unset, the node name is assumed to be the same as the node's hostname.

bindAddress [Required]
string

bindAddress can be used to override kube-proxy's idea of what its node's primary IP is. Note that the name is a historical artifact, and kube-proxy does not actually bind any sockets to this IP.

healthzBindAddress [Required]
string

healthzBindAddress is the IP address and port for the health check server to serve on, defaulting to "0.0.0.0:10256" (if bindAddress is unset or IPv4), or "[::]:10256" (if bindAddress is IPv6).

metricsBindAddress [Required]
string

metricsBindAddress is the IP address and port for the metrics server to serve on, defaulting to "127.0.0.1:10249" (if bindAddress is unset or IPv4), or "[::1]:10249" (if bindAddress is IPv6). (Set to "0.0.0.0:10249" / "[::]:10249" to bind on all interfaces.)

bindAddressHardFail [Required]
bool

bindAddressHardFail, if true, tells kube-proxy to treat failure to bind to a port as fatal and exit

enableProfiling [Required]
bool

enableProfiling enables profiling via web interface on /debug/pprof handler. Profiling handlers will be handled by metrics server.

showHiddenMetricsForVersion [Required]
string

showHiddenMetricsForVersion is the version for which you want to show hidden metrics.

mode [Required]
ProxyMode

mode specifies which proxy mode to use.

iptables [Required]
KubeProxyIPTablesConfiguration

iptables contains iptables-related configuration options.

ipvs [Required]
KubeProxyIPVSConfiguration

ipvs contains ipvs-related configuration options.

nftables [Required]
KubeProxyNFTablesConfiguration

nftables contains nftables-related configuration options.

winkernel [Required]
KubeProxyWinkernelConfiguration

winkernel contains winkernel-related configuration options.

detectLocalMode [Required]
LocalMode

detectLocalMode determines mode to use for detecting local traffic, defaults to ClusterCIDR

detectLocal [Required]
DetectLocalConfiguration

detectLocal contains optional configuration settings related to DetectLocalMode.

clusterCIDR [Required]
string

clusterCIDR is the CIDR range of the pods in the cluster. (For dual-stack clusters, this can be a comma-separated dual-stack pair of CIDR ranges.). When DetectLocalMode is set to ClusterCIDR, kube-proxy will consider traffic to be local if its source IP is in this range. (Otherwise it is not used.)

nodePortAddresses [Required]
[]string

nodePortAddresses is a list of CIDR ranges that contain valid node IPs, or alternatively, the single string 'primary'. If set to a list of CIDRs, connections to NodePort services will only be accepted on node IPs in one of the indicated ranges. If set to 'primary', NodePort services will only be accepted on the node's primary IPv4 and/or IPv6 address according to the Node object. If unset, NodePort connections will be accepted on all local IPs.

oomScoreAdj [Required]
int32

oomScoreAdj is the oom-score-adj value for kube-proxy process. Values must be within the range [-1000, 1000]

conntrack [Required]
KubeProxyConntrackConfiguration

conntrack contains conntrack-related configuration options.

configSyncPeriod [Required]
meta/v1.Duration

configSyncPeriod is how often configuration from the apiserver is refreshed. Must be greater than 0.

portRange [Required]
string

portRange was previously used to configure the userspace proxy, but is now unused.

windowsRunAsService [Required]
bool

windowsRunAsService, if true, enables Windows service control manager API integration.

DetectLocalConfiguration

Appears in:

DetectLocalConfiguration contains optional settings related to DetectLocalMode option

FieldDescription
bridgeInterface [Required]
string

bridgeInterface is a bridge interface name. When DetectLocalMode is set to LocalModeBridgeInterface, kube-proxy will consider traffic to be local if it originates from this bridge.

interfaceNamePrefix [Required]
string

interfaceNamePrefix is an interface name prefix. When DetectLocalMode is set to LocalModeInterfaceNamePrefix, kube-proxy will consider traffic to be local if it originates from any interface whose name begins with this prefix.

KubeProxyConntrackConfiguration

Appears in:

KubeProxyConntrackConfiguration contains conntrack settings for the Kubernetes proxy server.

FieldDescription
maxPerCore [Required]
int32

maxPerCore is the maximum number of NAT connections to track per CPU core (0 to leave the limit as-is and ignore min).

min [Required]
int32

min is the minimum value of connect-tracking records to allocate, regardless of maxPerCore (set maxPerCore=0 to leave the limit as-is).

tcpEstablishedTimeout [Required]
meta/v1.Duration

tcpEstablishedTimeout is how long an idle TCP connection will be kept open (e.g. '2s'). Must be greater than 0 to set.

tcpCloseWaitTimeout [Required]
meta/v1.Duration

tcpCloseWaitTimeout is how long an idle conntrack entry in CLOSE_WAIT state will remain in the conntrack table. (e.g. '60s'). Must be greater than 0 to set.

tcpBeLiberal [Required]
bool

tcpBeLiberal, if true, kube-proxy will configure conntrack to run in liberal mode for TCP connections and packets with out-of-window sequence numbers won't be marked INVALID.

udpTimeout [Required]
meta/v1.Duration

udpTimeout is how long an idle UDP conntrack entry in UNREPLIED state will remain in the conntrack table (e.g. '30s'). Must be greater than 0 to set.

udpStreamTimeout [Required]
meta/v1.Duration

udpStreamTimeout is how long an idle UDP conntrack entry in ASSURED state will remain in the conntrack table (e.g. '300s'). Must be greater than 0 to set.

KubeProxyIPTablesConfiguration

Appears in:

KubeProxyIPTablesConfiguration contains iptables-related configuration details for the Kubernetes proxy server.

FieldDescription
masqueradeBit [Required]
int32

masqueradeBit is the bit of the iptables fwmark space to use for SNAT if using the iptables or ipvs proxy mode. Values must be within the range [0, 31].

masqueradeAll [Required]
bool

masqueradeAll tells kube-proxy to SNAT all traffic sent to Service cluster IPs, when using the iptables or ipvs proxy mode. This may be required with some CNI plugins.

localhostNodePorts [Required]
bool

localhostNodePorts, if false, tells kube-proxy to disable the legacy behavior of allowing NodePort services to be accessed via localhost. (Applies only to iptables mode and IPv4; localhost NodePorts are never allowed with other proxy modes or with IPv6.)

syncPeriod [Required]
meta/v1.Duration

syncPeriod is an interval (e.g. '5s', '1m', '2h22m') indicating how frequently various re-synchronizing and cleanup operations are performed. Must be greater than 0.

minSyncPeriod [Required]
meta/v1.Duration

minSyncPeriod is the minimum period between iptables rule resyncs (e.g. '5s', '1m', '2h22m'). A value of 0 means every Service or EndpointSlice change will result in an immediate iptables resync.

KubeProxyIPVSConfiguration

Appears in:

KubeProxyIPVSConfiguration contains ipvs-related configuration details for the Kubernetes proxy server.

FieldDescription
syncPeriod [Required]
meta/v1.Duration

syncPeriod is an interval (e.g. '5s', '1m', '2h22m') indicating how frequently various re-synchronizing and cleanup operations are performed. Must be greater than 0.

minSyncPeriod [Required]
meta/v1.Duration

minSyncPeriod is the minimum period between IPVS rule resyncs (e.g. '5s', '1m', '2h22m'). A value of 0 means every Service or EndpointSlice change will result in an immediate IPVS resync.

scheduler [Required]
string

scheduler is the IPVS scheduler to use

excludeCIDRs [Required]
[]string

excludeCIDRs is a list of CIDRs which the ipvs proxier should not touch when cleaning up ipvs services.

strictARP [Required]
bool

strictARP configures arp_ignore and arp_announce to avoid answering ARP queries from kube-ipvs0 interface

tcpTimeout [Required]
meta/v1.Duration

tcpTimeout is the timeout value used for idle IPVS TCP sessions. The default value is 0, which preserves the current timeout value on the system.

tcpFinTimeout [Required]
meta/v1.Duration

tcpFinTimeout is the timeout value used for IPVS TCP sessions after receiving a FIN. The default value is 0, which preserves the current timeout value on the system.

udpTimeout [Required]
meta/v1.Duration

udpTimeout is the timeout value used for IPVS UDP packets. The default value is 0, which preserves the current timeout value on the system.

KubeProxyNFTablesConfiguration

Appears in:

KubeProxyNFTablesConfiguration contains nftables-related configuration details for the Kubernetes proxy server.

FieldDescription
masqueradeBit [Required]
int32

masqueradeBit is the bit of the iptables fwmark space to use for SNAT if using the nftables proxy mode. Values must be within the range [0, 31].

masqueradeAll [Required]
bool

masqueradeAll tells kube-proxy to SNAT all traffic sent to Service cluster IPs, when using the nftables mode. This may be required with some CNI plugins.

syncPeriod [Required]
meta/v1.Duration

syncPeriod is an interval (e.g. '5s', '1m', '2h22m') indicating how frequently various re-synchronizing and cleanup operations are performed. Must be greater than 0.

minSyncPeriod [Required]
meta/v1.Duration

minSyncPeriod is the minimum period between iptables rule resyncs (e.g. '5s', '1m', '2h22m'). A value of 0 means every Service or EndpointSlice change will result in an immediate iptables resync.

KubeProxyWinkernelConfiguration

Appears in:

KubeProxyWinkernelConfiguration contains Windows/HNS settings for the Kubernetes proxy server.

FieldDescription
networkName [Required]
string

networkName is the name of the network kube-proxy will use to create endpoints and policies

sourceVip [Required]
string

sourceVip is the IP address of the source VIP endpoint used for NAT when loadbalancing

enableDSR [Required]
bool

enableDSR tells kube-proxy whether HNS policies should be created with DSR

rootHnsEndpointName [Required]
string

rootHnsEndpointName is the name of hnsendpoint that is attached to l2bridge for root network namespace

forwardHealthCheckVip [Required]
bool

forwardHealthCheckVip forwards service VIP for health check port on Windows

LocalMode

(Alias of string)

Appears in:

LocalMode represents modes to detect local traffic from the node

ProxyMode

(Alias of string)

Appears in:

ProxyMode represents modes used by the Kubernetes proxy server.

Currently, two modes of proxy are available on Linux platforms: 'iptables' and 'ipvs'. One mode of proxy is available on Windows platforms: 'kernelspace'.

If the proxy mode is unspecified, the best-available proxy mode will be used (currently this is iptables on Linux and kernelspace on Windows). If the selected proxy mode cannot be used (due to lack of kernel support, missing userspace components, etc) then kube-proxy will exit with an error.

This page is automatically generated.

If you plan to report an issue with this page, mention that the page is auto-generated in your issue description. The fix may need to happen elsewhere in the Kubernetes project.

Last modified August 19, 2024 at 4:39 PM PST: Update config API for v1.31 (f69f28fb6b)